2012 Toro Consumer MX6080
This 60" deck mower features a bull-nose bumper, a 24 hp Kawasaki® 726cc Engine, and a heavy-duty frame. Built to last, AND designed for user comfort, the MX6080 features a thickly padded Toro premium seat and padded armrests, dual oversized Comfort Grip™ levers with hydraulic dampers, and full 3-D isolation. In addition, Toro's cutting technology always gives your lawn a superior quality of cut. Model shown 74872.
54" (137.2 cm) Fabricated Deck - For an aggressive deck built to handle tough cutting conditions yet provide a truly superior quality of cut, Toro's 4.5" (11.4 cm) deep, fully welded, fabricated deck is up to the challenge. The leading edge of the deck is reinforced with a Toro "Bull-Nose" commercial style bumper. Three anti-scalp wheels in front and two anti-scalp skids in the back help the deck float over rough terrain. Create your own natural fertilizer by adding a Recycling Kit or make yard clean-up a snap with an optional Twin Bagging system.
Fully Tubular Frame - A 1.5" X 3.0" (3.8 cm x 7.6 cm) fully tubular frame forms the rock solid foundation for the rest of the mower. The large continous frame tubes have seamless sides with no welded joints which provides maximum strength.
Folding ROPS - Folding Roll Over Protection System (ROPS) comes standard. The folding design folds easily with the help of quick-release pins. It tucks under the frame for compact storage or when mowing under low obstacles on flat ground.
Heavy Duty Spindles - The deck used on this model is equipped with huge heavy duty 7.75" (19.7 cm) diameter aluminum spindle housings that contain 1" (2.5 cm) diameter spindle shafts and oversized sealed bearings.
Hydro-Gear ZT3100 - The ZT3100 hydrostatic transmission has an internal, maintenance-free brake; a guarded, spin-on filter; and is significantly easier to maintain versus a wheel pump and motor system. Plus, the ZT3100 has fewer leak points by design so homeowners can be confident their machine's drive system is virtually bullet proof.
22" x 10" (56 cm x 25.4 cm) Rear Tires - These large, wide tires provide a smoother ride over rough terrain than smaller diameter tires. The width helps reduce turf compaction. The special tread provides the right mix of traction and reduced turf tear.
12" x 6" (30.5 cm x 15.2 cm) Smooth Front Tires - Professional landscape contractors know that smooth tires reduce turf wear and improve maneuverability.
Foot Operated HOC - This system allows you to quickly raise and lower the deck while mowing without taking your hands off of the controls. The HOC has a range from 1.5" - 4.5" (3.8 cm - 11.4 cm) with 13 positions in quarter inch increments making sure there is a setting just right for you and your lawn.
Removable Floor Pan - Removal of the floor pan allows you easy access to the top of the deck for cleaning off grass clippings. The floor pan is also pierced to give it a textured grip and natural drain holes.
Rubber Discharge Deflector - A flexible rubber discharge deflector is found on most commercial zero turn mowers and allows you to mow tightly around objects without damaging the deflector.
Engine Guard - This guard protects the engine on the sides and rear from objects that might damage your engine.
Premium Toro Seat - The premium seating system on the TITAN is truly a leader in comfort. The extra thick seat foam is contoured to envelope the operator in comfort and help hold you in place when traversing rough terrain. The seat is further cushioned by a unique adjustable seat spring suspension allowing you to have anywhere from 2 to 5 springs underneath the seat to give you customized support. A four-inch (10.2 cm) seat slide is adjustable while seated to help give you just the right fit. Adjustable armrests come standard.
2012 Toro Consumer MX6080
- 24 hp Kawasaki® 726cc
Construction - Forced Air-Cooled V-twin 4-cycle Vertical Shaft OHV
- Fuel Capacity
- 5 Gallon
- 21.5 hp
- HG-ZT3100 w/ charge pumps, shock valves & heavy duty gears
- Tires Rear
- 22" x 10"
- Tires Front
- 12" x 6" Smooth
- (Controls) - Dual oversized Comfort Grip™ levers with hydraulic dampers
- 74 in ROPS Up/47 in ROPS down
- 7.75 in diameter/1 in (2.54 cm) shaft
- 77.3 in
- Blade Tip Speed
- 18,000+ ft/min
- 75 in deflector up/63 in deflector down
- Number of Blades
- (Chute) - Molded Rubber
- Ground Speed
- 7.5 mph (12.1 kph)
- 10-gauge fabricated w/ bull-nose bumper
- Armrests Adjustable; Cup Holder; Foot Operated Height of Cut; Hour Meter; Hydraulic Dampeners; ROPS Folding; Washout Port - 2
- Cutting Height
- 1.5" to 4.5" 13 position
- Cutting Width
- 60 in
- Anti-Scalp Wheels
- 3 yr / 400 hr Limited Warranty
- Thickly-padded Toro Premium Seat