2012 Toro Consumer ZX4820

<< Back to 2012 Toro Consumer Zero Turn Mowers

2012 Toro Consumer ZX4820

This 48" deck mower features a bull-nose bumper, a 21.5 hp Kawasaki® 726cc Engine, and a heavy-duty frame. Built to last, AND designed for user comfort, the ZX4820 features a contoured 18" extra tall seat with armrests. In addition, Toro's cutting technology always gives your lawn a superior quality of cut.

Features

All

48" (121.9 cm) Fabricated Deck - For an aggressive deck built to handle tough cutting conditions yet provide a truly superior quality of cut, Toro's 4.5" (11.4 cm) deep, fully welded, fabricated deck is up to the challenge. The leading edge of the deck is reinforced with a Toro "Bull-Nose" commercial style bumper. Three anti-scalp wheels in front and two anti-scalp skids in the back help the deck float over rough terrain. Create your own natural fertilizer by adding a Recycling Kit or make yard clean-up a snap with an optional Twin Bagging system.

Fully Tubular Frame - A 1.5" X 3.0" (3.8 cm x 7.6 cm) fully tubular frame forms the rock solid foundation for the rest of the mower. The large continous frame tubes have seamless sides with no welded joints which provides maximum strength.

Folding ROPS - Folding Roll Over Protection System (ROPS) comes standard. The folding design folds easily with the help of quick-release pins. It tucks under the frame for compact storage or when mowing under low obstacles on flat ground.

3-Year/240 Hour Limited Warranty - The new TITAN Z is warranted against defects in materials and workmanship for three years or 240 hours.

Contoured 18" (45.7 cm) Extra Tall w/ Slide - The premium seating system on the TITAN is truly a leader in comfort. The extra thick seat foam is contoured to envelope the operator in comfort and help hold you in place when traversing rough terrain. The seat is further cushioned by a unique adjustable seat spring suspension allowing you to have anywhere from 2 to 5 springs underneath the seat to give you customized support. A four-inch (10.2 cm) seat slide is adjustable while seated to help give you just the right fit. Adjustable armrests and retractable seat belt come standard.

Hydro-Gear® ZT2800 - The ZT2800 hydrostatic transmission has an internal, maintenance-free brake; a guarded, spin-on filter; and is significantly easier to maintain versus a wheel pump and motor system. Plus, the ZT2800 has fewer leak points by design so homeowners can be confident their machine's drive system is virtually bullet proof.

Foot Operated HOC - This system allows you to quickly raise and lower the deck while mowing without taking your hands off of the controls. The HOC has a range from 1.5" - 4.5" (3.8 cm - 11.4 cm) with 13 positions in quarter inch increments making sure there is a setting just right for you and your lawn.

20" x 8" (51 cm x 20 cm) Rear Tires - These large tires provide a smoother ride over rough terrain than smaller diameter tires. The special tread provides the right mix of traction and reduced turf tear.

Removable Floor Pan - Removal of the floor pan allows you easy access to the top of the deck for cleaning off grass clippings. The floor pan is also pierced to give it a textured grip and natural drain holes.

Smooth Front Tires - Professional landscape contractors know that smooth tires reduce turf wear and improve maneuverability.

Engine Guard - This guard protects the engine on the sides and rear from objects that might damage your engine.

Rubber Discharge Deflector - A flexible rubber discharge deflector is found on most commercial zero turn mowers and allows you to mow tightly around objects without damaging the deflector.

2012 Toro Consumer ZX4820

Specifications

Engine

Engine
21.5 hp* Kawasaki® 726cc
Construction - Forced Air-Cooled V-twin, 4-cycle Vertical Shaft, OHV
Displacement
726cc
Fuel Capacity
5 Gallon
Horsepower
21.5 hp

Transmission

Transmission
Hydro-Gear® ZT2800® w/ charge pumps

Chassis

Tires Front
11" x 4" Smooth
Steering
Dual Comfort Grip™ levers with hydraulic dampers
Tires Rear
20" x 10"

Dimensions

Spindles
1" (2.54 cm) Shaft
Height
73 in ROPS Up/46 in ROPS down
Length
77.3 in
Blade Tip Speed
18,000+ ft/min
Width
52.4 in deflector up/61.5 in deflector down

General Information

Number of Blades
3
Cutting Height
1.5" to 4.5" 13 position
Discharge
(Deflector) - Molded Rubber
Ground Speed
7.5 mph (12.1 kph)
Standard
Armrests Adjustable
Cup Holder
Foot Operated Height of Cut
Hour Meter
Hydraulic Dampeners
ROPS, Folding
Washout Port - 2
Cutting Width
48 in
Anti-Scalp Wheels
3
Deck
Design - 10-gauge fabricated w/ bull-nose bumper
Warranty
3-year / 240 hr Limited
Seat
Contoured 18" Extra Tall w/Slide; Adjustable Seat Spring Suspension

Photos

Request a quote for: 2012 Toro Consumer ZX4820

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.